From 104681198e5779d7cf0f180d5cfb160748361d21 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?John=20Ankarstr=C3=B6m?= Date: Tue, 13 Jul 2021 17:19:19 +0200 Subject: Clean up httpd.conf --- usr/pkg/etc/httpd/httpd.conf | 368 +++++-------------------------------------- 1 file changed, 40 insertions(+), 328 deletions(-) (limited to 'usr/pkg/etc/httpd') diff --git a/usr/pkg/etc/httpd/httpd.conf b/usr/pkg/etc/httpd/httpd.conf index a1a6b6e..0d85006 100644 --- a/usr/pkg/etc/httpd/httpd.conf +++ b/usr/pkg/etc/httpd/httpd.conf @@ -1,68 +1,6 @@ -# -# This is the main Apache HTTP server configuration file. It contains the -# configuration directives that give the server its instructions. -# See for detailed information. -# In particular, see -# -# for a discussion of each configuration directive. -# -# Do NOT simply read the instructions in here without understanding -# what they do. They're here only as hints or reminders. If you are unsure -# consult the online docs. You have been warned. -# -# Configuration and logfile names: If the filenames you specify for many -# of the server's control files begin with "/" (or "drive:/" for Win32), the -# server will use that explicit path. If the filenames do *not* begin -# with "/", the value of ServerRoot is prepended -- so "logs/access_log" -# with ServerRoot set to "/usr/local/apache2" will be interpreted by the -# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" -# will be interpreted as '/logs/access_log'. - -# -# ServerRoot: The top of the directory tree under which the server's -# configuration, error, and log files are kept. -# -# Do not add a slash at the end of the directory path. If you point -# ServerRoot at a non-local disk, be sure to specify a local disk on the -# Mutex directive, if file-based mutexes are used. If you wish to share the -# same ServerRoot for multiple httpd daemons, you will need to change at -# least PidFile. -# ServerRoot "/usr/pkg" - -# -# Mutex: Allows you to set the mutex mechanism and mutex file directory -# for individual mutexes, or change the global defaults -# -# Uncomment and change the directory if mutexes are file-based and the default -# mutex file directory is not on a local disk or is not appropriate for some -# other reason. -# -# Mutex default:/var/run - -# -# Listen: Allows you to bind Apache to specific IP addresses and/or -# ports, instead of the default. See also the -# directive. -# -# Change this to Listen on specific IP addresses as shown below to -# prevent Apache from glomming onto all bound IP addresses. -# -#Listen 12.34.56.78:80 Listen 0.0.0.0:80 -# -# Dynamic Shared Object (DSO) Support -# -# To be able to use the functionality of a module which was built as a DSO you -# have to place corresponding `LoadModule' lines at this location so the -# directives contained in it are actually available _before_ they are used. -# Statically compiled modules (those listed by `httpd -l') do not need -# to be loaded here. -# -# Example: -# LoadModule foo_module modules/mod_foo.so -# LoadModule mpm_event_module lib/httpd/mod_mpm_event.so #LoadModule mpm_prefork_module lib/httpd/mod_mpm_prefork.so #LoadModule mpm_worker_module lib/httpd/mod_mpm_worker.so @@ -171,311 +109,84 @@ LoadModule dir_module lib/httpd/mod_dir.so #LoadModule userdir_module lib/httpd/mod_userdir.so LoadModule alias_module lib/httpd/mod_alias.so #LoadModule rewrite_module lib/httpd/mod_rewrite.so +LoadModule perl_module lib/httpd/mod_perl.so -# -# If you wish httpd to run as a different user or group, you must run -# httpd as root initially and it will switch. -# -# User/Group: The name (or #number) of the user/group to run httpd as. -# It is usually good practice to create a dedicated user and group for -# running httpd, as with most system services. -# -User www -Group www - + User www + Group www -# 'Main' server configuration -# -# The directives in this section set up the values used by the 'main' -# server, which responds to any requests that aren't handled by a -# definition. These values also provide defaults for -# any containers you may define later in the file. -# -# All of these directives may appear inside containers, -# in which case these default settings will be overridden for the -# virtual host being defined. -# - # -# ServerAdmin: Your address, where problems with the server should be -# e-mailed. This address appears on some server-generated pages, such -# as error documents. e.g. admin@your-domain.com +# rbsd.ankarstrom.se # +ServerName rbsd.ankarstrom.se:80 ServerAdmin john@ankarstrom.se +DocumentRoot "/var/www/rbsd/htdocs" -# -# ServerName gives the name and port that the server uses to identify itself. -# This can often be determined automatically, but we recommend you specify -# it explicitly to prevent problems during startup. -# -# If your host doesn't have a registered DNS name, enter its IP address here. -# -#ServerName www.example.com:80 - -# -# Deny access to the entirety of your server's filesystem. You must -# explicitly permit access to web content directories in other -# blocks below. -# +# Secure root filesystem - AllowOverride none - Require all denied + AllowOverride none + Require all denied -# -# Note that from this point forward you must specifically allow -# particular features to be enabled - so if something's not working as -# you might expect, make sure that you have specifically enabled it -# below. -# - -# -# DocumentRoot: The directory out of which you will serve your -# documents. By default, all requests are taken from this directory, but -# symbolic links and aliases may be used to point to other locations. -# -DocumentRoot "/usr/pkg/share/httpd/htdocs" - - # - # Possible values for the Options directive are "None", "All", - # or any combination of: - # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews - # - # Note that "MultiViews" must be named *explicitly* --- "Options All" - # doesn't give it to you. - # - # The Options directive is both complicated and important. Please see - # http://httpd.apache.org/docs/2.4/mod/core.html#options - # for more information. - # - Options Indexes FollowSymLinks - - # - # AllowOverride controls what directives may be placed in .htaccess files. - # It can be "All", "None", or any combination of the keywords: - # AllowOverride FileInfo AuthConfig Limit - # - AllowOverride None - - # - # Controls who can get stuff from this server. - # - Require all granted + + Options Indexes FollowSymLinks + AllowOverride All + Require all granted -# -# DirectoryIndex: sets the file that Apache will serve if a directory -# is requested. -# - DirectoryIndex index.html + DirectoryIndex index.html -# -# The following lines prevent .htaccess and .htpasswd files from being -# viewed by Web clients. -# - Require all denied + Require all denied -# -# ErrorLog: The location of the error log file. -# If you do not specify an ErrorLog directive within a -# container, error messages relating to that virtual host will be -# logged here. If you *do* define an error logfile for a -# container, that host's errors will be logged there and not here. -# ErrorLog "/var/log/httpd/error_log" - -# -# LogLevel: Control the number of messages logged to the error_log. -# Possible values include: debug, info, notice, warn, error, crit, -# alert, emerg. -# LogLevel warn - # - # The following directives define some format nicknames for use with - # a CustomLog directive (see below). - # - LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined - LogFormat "%h %l %u %t \"%r\" %>s %b" common - - - # You need to enable mod_logio.c to use %I and %O - LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio - - - # - # The location and format of the access logfile (Common Logfile Format). - # If you do not define any access logfiles within a - # container, they will be logged here. Contrariwise, if you *do* - # define per- access logfiles, transactions will be - # logged therein and *not* in this file. - # - CustomLog "/var/log/httpd/access_log" common - - # - # If you prefer a logfile with access, agent, and referer information - # (Combined Logfile Format) you can use the following directive. - # - #CustomLog "/var/log/httpd/access_log" combined + LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined + LogFormat "%h %l %u %t \"%r\" %>s %b" common + CustomLog "/var/log/httpd/access_log" combined - # - # Redirect: Allows you to tell clients about documents that used to - # exist in your server's namespace, but do not anymore. The client - # will make a new request for the document at its new location. - # Example: - # Redirect permanent /foo http://www.example.com/bar - - # - # Alias: Maps web paths into filesystem paths and is used to - # access content that does not live under the DocumentRoot. - # Example: - # Alias /webpath /full/filesystem/path - # - # If you include a trailing / on /webpath then the server will - # require it to be present in the URL. You will also likely - # need to provide a section to allow access to - # the filesystem path. - - # - # ScriptAlias: This controls which directories contain server scripts. - # ScriptAliases are essentially the same as Aliases, except that - # documents in the target directory are treated as applications and - # run by the server when requested rather than as documents sent to the - # client. The same rules about trailing "/" apply to ScriptAlias - # directives as to Alias. - # - ScriptAlias /cgi-bin/ "/usr/pkg/libexec/cgi-bin/" - - - - - # - # ScriptSock: On threaded servers, designate the path to the UNIX - # socket used to communicate with the CGI daemon of mod_cgid. - # - #Scriptsock cgisock + # Put Redirect, Alias and ScriptAlias directives here + ScriptAlias /cgi-bin/ "/usr/pkg/libexec/cgi-bin/" -# -# "/usr/pkg/libexec/cgi-bin" should be changed to whatever your ScriptAliased -# CGI directory exists, if you have that configured. -# - AllowOverride None - Options None - Require all granted + AllowOverride None + Options None + Require all granted - # - # Avoid passing HTTP_PROXY environment to CGI's on this or any proxied - # backend servers which have lingering "httpoxy" defects. - # 'Proxy' request header is undefined by the IETF, not listed by IANA - # - RequestHeader unset Proxy early + # + # Avoid passing HTTP_PROXY environment to CGI's on this or any proxied + # backend servers which have lingering "httpoxy" defects. + # 'Proxy' request header is undefined by the IETF, not listed by IANA + # + RequestHeader unset Proxy early - # - # TypesConfig points to the file containing the list of mappings from - # filename extension to MIME-type. - # - TypesConfig etc/httpd/mime.types - - # - # AddType allows you to add to or override the MIME configuration - # file specified in TypesConfig for specific file types. - # - #AddType application/x-gzip .tgz - # - # AddEncoding allows you to have certain browsers uncompress - # information on the fly. Note: Not all browsers support this. - # - #AddEncoding x-compress .Z - #AddEncoding x-gzip .gz .tgz - # - # If the AddEncoding directives above are commented-out, then you - # probably should define those extensions to indicate media types: - # - AddType application/x-compress .Z - AddType application/x-gzip .gz .tgz - - # - # AddHandler allows you to map certain file extensions to "handlers": - # actions unrelated to filetype. These can be either built into the server - # or added with the Action directive (see below) - # - # To use CGI scripts outside of ScriptAliased directories: - # (You will also need to add "ExecCGI" to the "Options" directive.) - # - #AddHandler cgi-script .cgi - - # For type maps (negotiated resources): - #AddHandler type-map var - - # - # Filters allow you to process content before it is sent to the client. - # - # To parse .shtml files for server-side includes (SSI): - # (You will also need to add "Includes" to the "Options" directive.) - # - #AddType text/html .shtml - #AddOutputFilter INCLUDES .shtml + TypesConfig etc/httpd/mime.types + AddType application/x-compress .Z + AddType application/x-gzip .gz .tgz + + #AddType application/x-gzip .tgz + #AddEncoding x-compress .Z + #AddEncoding x-gzip .gz .tgz + #AddHandler cgi-script .cgi + #AddType text/html .shtml + #AddOutputFilter INCLUDES .shtml -# -# The mod_mime_magic module allows the server to use various hints from the -# contents of the file itself to determine its type. The MIMEMagicFile -# directive tells the module where the hint definitions are located. -# #MIMEMagicFile etc/httpd/magic -# -# Customizable error responses come in three flavors: -# 1) plain text 2) local redirects 3) external redirects -# -# Some examples: -#ErrorDocument 500 "The server made a boo boo." -#ErrorDocument 404 /missing.html -#ErrorDocument 404 "/cgi-bin/missing_handler.pl" -#ErrorDocument 402 http://www.example.com/subscription_info.html -# - -# -# MaxRanges: Maximum number of Ranges in a request before -# returning the entire resource, or one of the special -# values 'default', 'none' or 'unlimited'. -# Default setting is to accept 200 Ranges. -#MaxRanges unlimited - -# -# EnableMMAP and EnableSendfile: On systems that support it, -# memory-mapping or the sendfile syscall may be used to deliver -# files. This usually improves server performance, but must -# be turned off when serving from networked-mounted -# filesystems or if support for these functions is otherwise -# broken on your system. -# Defaults: EnableMMAP On, EnableSendfile Off -# -#EnableMMAP off -#EnableSendfile on - -# Supplemental configuration -# -# The configuration files in the etc/httpd/extra/ directory can be -# included to add extra features or to modify the default configuration of -# the server, or you may simply copy their contents here and change as -# necessary. - # Server-pool management (MPM specific) #Include etc/httpd/httpd-mpm.conf @@ -513,6 +224,7 @@ Include etc/httpd/proxy-html.conf # Secure (SSL/TLS) connections #Include etc/httpd/httpd-ssl.conf + # # Note: The following must must be present to support # starting without SSL on platforms with no /dev/random equivalent -- cgit v1.2.3